- tranny question
- Flywheel questions
- Argg, okay, who had trouble with the t40's on the rear diff?
- Clutch problems (kinda long)
- clutch suggestions
- spec I clutch
- SVO Input Shaft
- clutch woes
- gear ratio's not making sense.
- Transmission mount
- Tranny Grinds into 3rd Gear Intermittantly...
- rear questions.
- Centerforce clutch
- Transmission leaking from rear
- Shift fork stud?
- Cable or Gear?
- 7.5 pinion issue
- TKO 5 speed
- IRS EBrake to SVO how?
- TC quad hole mods
- spec stage 3 worn after 600 miles? kinda long
- rearend options
- Clutch questions
- what shifters are you using?
- differential torque
- 7.5 rebuild
- amsoil 75w140 synthetic
- Shifter gone wild
- Anyone think I need new axles?
- bearing retainer
- RCA bolts
- doing clutch this weekend
- won't stay in first
- Help w/ pinion shaft alignment
- Leaking from pinion nut
- tbird 8.8 rear
- Upside down x-member
- anyone running spec 3+
- Decent shifts/bad noise
- General T5 question(s)...Help y'all
- diff oil change
- Transmission noise
- noise when turning..
- IRS Interchange-ability???
- Heavy Vibration
- Camshaft Question
- Stock quadrant vs. aluminum
- rear-end troubles
- first to second quick shift makes noise....
- Help!!!
- Axle Interchangeability
- Drive shaft
- reluctant t-5
- Lightweight Flywheel
- Need quick amswer on flywheel swap
- mini stock clutch
- Did all SVO's come with manual transmissions?
- IRS Pinion flange get RTV????
- Rear end grinding sound. Shoot!
- clutch packs..difficulty level?
- T5 help please
- Axle saver bearings?
- 3.27 or 3.55 swap?
- Driveshaft bolt size
- I hate plastic parts. My quadrant failed today!
- Difficult shifting gears
- throwout bearing vibration
- Stripped Shifter Plate Bolt
- Gearing on an '84 T-5
- Need rear axle swap pics.
- 1983 SVO V8 5.0 tranny?
- What is the benefit? really need some advice here please
- Auto clutch cable adjustment question
- noise and vibration
- Will TC T-5's fit the SVO ?
- Trans Fluid
- quadrant pawl removal - help
- 8.8 Turbo Coupe swap issue
- Tranny end shaft weight question
- 8.8 production question
- shift fix
- Removing Tranny Help !!
- New dog bone
- Cheap Easy Axle Narrowing Mod
- axle play
- So what goes here?
- Oil on Clutch Disk?
- DogBone - what am I doing wrong?
- Pressure plate bolts
- T5 to a C4 swap
- Fuel tank filler tube bolt bolt hole
- Clutch noise......What is it?!
- Diff Carrier Bearing Replacement
- Aluminum Flywheel Noises - Fix?
- Having trouble finding a dogbone..
- Can you ID this transmission?
- Need help!!! My RPMS go up and down
- Clutch grabbing height. What is normal?
- Tranny Swap?
- What Rear End Is This?
- Need help ID'ing a rear end
- Need pics / dimensions on Hurst Shifter for Bob Tweedy
- Cross-member bolt and removing Red Loctite
- Moser axles...
- Pinion snubber
- 1984 SVO trans problems
- New clutch, noise when slowing down in gear
- 8.8 rear end swap
- Clutch of choice for daily driver.
- 4.10 gears?
- IRS issue..
- Help!!!!!!
- rear dif.
- squeking
- Odd noise..
- rearend noises
- need some input on driven gears...
- IRS or Solid Axle?
- Bellhousing to block bolts...
- Rear End Miss aligned?
- speedo cable, steering rack AND glue questions
- Steel Bearing Reainer?
- Another 8.8 swap question
- Any Hope for a Stock SVO Bearing Retainer?
- 7.5 Trac-Lok question
- Stock Crankshaft Specs
- Cheap Ford Axels for SVO (Hint, LSC)
- SVO Automatic
- Aluminium Flywheel rebuild??
- Aluminum driveshaft clang???
- Shifter question
- Shift base bolts all broken
- squeak/squeal noise when taking off
- D9zc 6394 ea
- Throwout bearing
- Ford 999 report says 2.73 rear end
- Clutch choices
- removeing flywheel pins