I hope it works

[U S Marine]

I ordered the Grip brand strut tower brace 129-2504 and the sub-frame connector kit with the seat support 129-2542 from Jegs. They think the strut tower brace will clear the inter-cooler. Do any of you have any experience with that company? I wanted to order the 4 point lower cross brace, but I held off since our lowers are different from the GT. It's on page 183-M of the newest catalog. Please advise. Also, what is the stock bolt circle for the SVO as well as the back spacing. I've read 5-4.5 for the circle, and 44mm for back space is this correct? Please let me know. SVO Bud, if you are in the Marietta area this weekend give me a buzz. Work # is 678 655-6742.

Tony

[svobud]

I'll be getting in Friday night. I can call Saturday or Sunday, but what's a good time to call?

[U S Marine]

Bud, anytime during the day. I work pretty much from 7 AM to 4 PM. On Sat and Sun, I'll be home home. (770) 517-8803. What's your thought on the parts I ordered? Do you think they will work? I'm mostly concerened about the strut tower brace. Thanks,
Tony

[svobud]

I'm not familar with anything Jegs offers ... so I couldn't answer anything about the company or parts they offer.

[svono50]

Tony,

Lug pattern is 5 by 4.5" and offset is 43mm by my calculations. You can check out the active thread in the wheels & tires section of the forum for more info on wheels.

[U S Marine]

Thanks for the info. I went to the wheels and tires section, probably read all 116 posts! Between them all I found the answer to my question. I appreciate your response.
Tony

BTW, I moved to Georgia from Libertyville IL and I have/had a friend that was on the Streamwood Police Department.