Header bolts?

[SVORob]

I'm looking for a better header bolt.
My ATR header to head is an 8mm allen sockettype bolt.
I beleve the thread is 10mx1.50 x 24mm long please correct me if I'm wrong MR Flemming.
I would like to find a 10mm 6 point head bolt kinda like the old time header bolts that were 3/8" x 1" with a 7/16 head so I can get 2 them with a open end wrench
Any one got a great line on bolts?

[CP86SVO]

Check out page 81

http://www.arp-bolts.com/Catalog/Catalog.html

HTH WS

[Pat_in_L.A.]

Have you looked at Stage 8?

http://www.stage8.com

[mutant]

Bolts? I always check http://www.mcmaster.com/ first.
Their part# 90854A189 looks like it has too large of a head though.

[boostedbruiser]

I have stg 8 from Motion dynamics and love them. Haven't had a issue installing or removing them. Little antisieze and trq. Besure to retrq after a few engine cycles.

[SVORob]

Thanks guys ordered fron stage 8
I had seen them before and could not remember their name

[Pat_in_L.A.]

Their part# 90854A189 looks like it has too large of a head though.

Maybe the same size but look for allen head at Mc Master.