Aftermarket Center Caps ?

[93-331-29psi]

Are there center caps available, to clear the dust cap, when using bullitt wheels on SVO rotors?

[85ttops]

[tateg]

there are and it has been posted. I don't know the company but if you search you might find them.

[93-331-29psi]

there are and it has been posted. I don't know the company but if you search you might find them.

Yeah, I did a search (center caps) and couldn't find it, which is why I posted the question. Thought maybe someone would remember the posting.

[onthegosvo]

http://www.svoca.com/forum/showthread.php?t=15043&page=2&highlight=center+caps

[93-331-29psi]

Thanks

[onthegosvo]

Glad that I could help

[tateg]

Yep. that's the thread.

[gbeaird]

Those are supposed to fit an SVO wheel? I measured and came up with 2.48 and change, not 2.5". If they work, though, and it's been tested, I'll be ordering a couple of sets. Thanks.

Gene Beaird,
86 2R SVO, G Stock,
Pearland, Texas

[NinjaBOY]

Yeah, I put those centercaps on my SVO and they do indeed fit, but it still requires a little pounding on the center cap, and yes they're a tight fit on the wheel. What's nice is the black that you see as the background on the outside of the cap is actually double-sided tape and if your dust cap is clean, they will adhere themselves to the dustcap when you install the wheel, which will help keep them in place. I drove all the way to KY and autocrossed the car with these on no problems. Check out the avatar...

[tateg]

Those are supposed to fit an SVO wheel? I measured and came up with 2.48 and change, not 2.5". If they work, though, and it's been tested, I'll be ordering a couple of sets. Thanks.

Gene Beaird,
86 2R SVO, G Stock,
Pearland, Texas

These are for the '05+ mustang wheels.

[gbeaird]

Oh yeah, I went back and reread the first post. Sorry.

Gene Beaird