Tweet
Rhino 3000 Label Maker
Just picked this up and it's a NICE to have option for labeling wires. This one will print onto heat shrink tubing and gives you a good option for labeling your wires thoughout your harness. It's also a good option if you're building a new or custom harness. I wanted to put together a professional look and I think this will meet the bill.
Look here for the product and it's description: http://www.provantage.com/dymo-18189~7CSTR15C.htm
It may be a little pricey depending on your project, but in my search I didn't find a better option.
Here is the kit and results I got.
Look here for the product and it's description: http://www.provantage.com/dymo-18189~7CSTR15C.htm
It may be a little pricey depending on your project, but in my search I didn't find a better option.
Here is the kit and results I got.
Attached Files
Comment