Exhaust Flange

[dsrk98]

I found this turbo exhaust flange on the net. It has the factory swing arm and looks like a 3 inch down pipe could be bolted to it. Has anyone used something like this and had good results?

[richsvo]

dsrk98,

Where did you find that? Do you have a website for it?
Please advise, as I am presently looking to build a downpipe, but I want the flange with the wastegate flapper, etc. (I have found regular flanges, but not with all the "stuff" on them like this one)

Thanks, in advance,

Rich

[dsrk98]

Here

I am not too familiar with turbo's and what parts interchange. It looks as though this flange will bolt up to the stock turbo then bot another flange onto that to has a true 3 inch outlet. Here are the two websites I found this stuff.

http://www.carcraftinc.com/turbo1.htm

http://www.relentlessracing.com/new_diy_turbo_page.html

[richsvo]

dsrk98,

Thanks, man! I appreciate it!

Rich

[svoman2300]

Check this one out. Click on accessories . He takes your core cuts it and welds a 3 " elbow on it.

http://www.40bob.com/

[Pat_in_L.A.]

Look close at that pic. Ask about the augered out hole.

http://www.carcraftinc.com/Parts/images/svalve.jpg

This looks like the volvo/saab wastegate housing, It's just over 2 inches at the outlet except that it's flat instead of tapered like the SVO (and of course no 90 degree bend).

[dsrk98]

Thanks

Thanks for the tip, I did not know or notice that.