Whilst doing my engine rebuild earlier this year I decided I wanted to change the radiator as well. Thought I'd look into aluminium ones and found this one on e-bay although I'm sure they're available through many sources. This particular radiator, can't remember the part number, is designed for the 5.0 and states you can't use the stock cooling fan.
This is not so much of a problem with the SVO as the cooling fan is attached to the upper radiator supports. It also doesn't have a transmission cooler, again, not a problem. Allows the use of readily available stock radiator hoses and retains the stock upper and lower retaining system. I've been using a mixture of "Dex-Cool" (the orange coolant) and distilled water in a 50/50 mix and the car runs really well.
Pretty much a stock, bolt in replacement except it aluminium and cheaper than a copper/ brass equivalent. The quality is really nice and it comes with stickers. YAY!!
This is not so much of a problem with the SVO as the cooling fan is attached to the upper radiator supports. It also doesn't have a transmission cooler, again, not a problem. Allows the use of readily available stock radiator hoses and retains the stock upper and lower retaining system. I've been using a mixture of "Dex-Cool" (the orange coolant) and distilled water in a 50/50 mix and the car runs really well.
Pretty much a stock, bolt in replacement except it aluminium and cheaper than a copper/ brass equivalent. The quality is really nice and it comes with stickers. YAY!!
Comment