Tweet
Well got some pictures today of the new 1C project, started with wheels, tires and exhaust. Spoiler is getting painted soon. Wheels are 17 x 8 Charcoal Bullitts with 235/45/17 Eagle F1 Assymetric Tires, nothing new here but I like the look.
As for the exhaust had to replace the rusty chrome single 3" and Flowmaster attached to the stock downpipe and original cat???
Started looking at threads and laying out a system I liked which will breathe a little better, have the stock dual tip look, and last, full 304SS including fasteners, flange and hangers.
Went with the Merkur SS downpipe (thanks Chalky) chopped it off short adding a 3" braided flex pipe, 3" SS Magnaflow Cat in close to stock location, straight back to 3" offset in/out Borla Pro XS muffler. Reduced at the the outlet to 2.5" SS over the axle to a custom made dual SS tip (Thanks to NinjaBoy for the pattern). Still needs slash cut at the tip and a high polish. Will post more when it's done.
Thanks to many of you for ideas and inputs.
As for the exhaust had to replace the rusty chrome single 3" and Flowmaster attached to the stock downpipe and original cat???
Started looking at threads and laying out a system I liked which will breathe a little better, have the stock dual tip look, and last, full 304SS including fasteners, flange and hangers.
Went with the Merkur SS downpipe (thanks Chalky) chopped it off short adding a 3" braided flex pipe, 3" SS Magnaflow Cat in close to stock location, straight back to 3" offset in/out Borla Pro XS muffler. Reduced at the the outlet to 2.5" SS over the axle to a custom made dual SS tip (Thanks to NinjaBoy for the pattern). Still needs slash cut at the tip and a high polish. Will post more when it's done.
Thanks to many of you for ideas and inputs.
Attached Files
Comment