Tweet
I am looking to make my own D.P., I can locate pipe and mandrel bent fittings, does anyone know where I can find the flange and ball/socket fittings to weld to the pipe?
-
86 1D - Sold
Looking again in spring '08 -
Why?
Why when you can buy something tried & true and bolts right in???? I guess if you are doing something truly specialized.....Maybe the faques?????
1 Modded, 1 Not -
I'd say he's doing it because, from what I've read around the SVO community, nobody has any in stock...If it ain't broke... Give me some time!Comment
-
Oh yea, do a search for "exhaust flange" and a site will come up that has all kinds of turbo flanges... including ones that are a bigger inner diameter to match a 3" DP... I thought I bookmarked the site, but can't find it... and it's late and time for bed...If it ain't broke... Give me some time!Comment
-
EvilBay/turbo
I see various parts fs in the t3/t4 turbo section of Ebay if that will help......
1 Modded, 1 NotComment
-
Try
Try Pat_in_LA he has built a few nasty DPS he would be a good resourse for parts. But if I was to do it I would go to turbonetics and buy the wastegate with the flange and bolt it right up instead of using the stock elbow which is a waste of time in my opinion.
Good luck
You can always try Tiny Avenger. Dave can usually dig up someting.Confucius says" a closed mouth gathers no foot"Comment
-
-
I am mechanically inclined and I have fabricated the downpipes on my twin turbo 5.0. I can do it on my time and my budget.
I could buy one, and it still may be an option, but I am going to fab up a 3" to 2- 2.5" y-pipe also. Also just to say "I made that" !
Thanks for the suggestions!!!86 1D - Sold
Looking again in spring '08Comment
Comment