Stage 8 Fasteners

[Unclesams_SVO]

I had a problem with keeping the turbo stud nuts from loosening and falling off my car. I was referred to www.stage8.com and found that p/n 3952 works perfect on the SVO.

I installed them last night and they work great, the nut design seems to fit a lot better then the "Cummin's Nut" and there was no problems fitting the locking hardware in there either.

[Henson]

Yep. I have them too. NP

[fast4cylNY]

I'll agree with the both of you guys. I had bought some header bolts from them for the white 85' (Bud's old car) before I sold it to keep the Rod's header from loosening up on me. They worked like a charm. Header bolts are still right were I tightened them to. Good stuff indeed.

Tommy

[SVORob]

I have their header to head bolts they work awesome

[JP_McCann]

so these hold better than the cummins nuts do? Are people using this nut with the cummins studs?

[SVOeric]

wrong place... these hold the header onto the head.

[JP_McCann]

I had a problem with keeping the turbo stud nuts from loosening and falling off my car. I was referred to www.stage8.com and found that p/n 3952 works perfect on the SVO.

I installed them last night and they work great, the nut design seems to fit a lot better then the "Cummin's Nut" and there was no problems fitting the locking hardware in there either.

By this post it seems that he is using them to hold the turbo to the manifold. Doesn't the manifold to head use bolts? The part number posted is for a nut.

[Unclesams_SVO]

so these hold better than the cummins nuts do? Are people using this nut with the cummins studs?

IMO, yes these are way better then the cummins nuts.