stock replacement bushings???

[Philc]

ok, I've looked through a few catalogs, and can't find any stock replacement SVO bushings.

I'd go poly in a second, but the class I race in (G stock) specifies I need to run stock.

where can I find stock bushings?
thanks all!!!

[GAboySVO]

I believe you can get the LCA bushings from Kragen.

TRW 12356 - Lower, front - $21

TRW 12408 - Lower, rear - -$22

They also have the rear control arm bushings as well.

[Gyrhead]

I know this thread is pretty darn old, but has anyone come up with another number for the front LCA bushings? No one I deal with has TRW and the interchange crosses over from these TRW numbers to Moog numbers for the standard Fox Mustang, which I know is not correct. Is one SVO LCA bushing different or unique and one the same as the standard Fox? I'm redoing all the bushings in the Bolo car in prep for this summer's festivities at Barber.

If no one has a decent interchange, what about the Prothane Total Kits? I guess you could just bag the front LCA bushings and not use the rear upper LCA poly bushings. I'm a little ambivalent about poly. It seems too hard and always ends up squeaking.

Thanks!

[SVOBart]

Bushings for the upper rear control arms are still available through Ford. You can get the upper arms with stock rubber bushings (94 Cobra spec) for about $16 each and then the housing bushings in a rear end install kit for $10. The kit also includes new C clips and some friction modifier. That kit is a steal when you consider that Ford sells the housing side bushings for $9 each.