Newbie with a cobra r wheel question

[Boport]

Hey Guys,

Newbie here, 1st post :) I've been lurking around the last week or so and have a question about cobra r wheel fitment onto SVO's. I searched and didn't even find my answer in the big wheel thread, but here it goes.

If I was to bolt up a set of 94-99 cobra r wheels onto my svo, would they even bolt up? I understand that the center caps wont fit, but If I were not concerned about that would they at least bolt up without upgrading to SN95 stuff? Will they stick out past the fender well? Thanks for your help!

Bo

[kiwi]

Bo.......Didn't you ask on TFord?.....What answer are you exactly lookin' for? Heck, try 'em on......There is also a good size thread on this here......

[Boport]

Yep sure did post on turboford :) Thought I'd get some opinions from some more svo owners. I wish I had the money to buy a set of every cobra r wheel to mount up and see which one will work lol. I've read the thread on here 3 times through now, and didn't see anything that would answer my questions. Later,

Bo

[OneBad93LX]

My BBK/ Speedware Cobra R's will not work... I went with 94/95 Cobra wheels... they are a bolt on!!

http://24.166.25.249/84SVO/DSC01339.JPG

[Chris Hadden]

The Cobra R wheel will fit w/ stock suspention but they will stick out past the fender. I have tried the R-58 and the M-179, both will fit the rear but the 179 fits better under the front. I also upgraded my front suspention to sn95 with Bullitt brakes. If you use the Cobra R wheels with stock hubs the center caps will not fit on the wheels. I wanted to put the Cobra R wheels on my SVO and all together it cost me about $2,000. Unless you just have to have them I don't recommend the hassle.:)