Announcement

Collapse
No announcement yet.

Studder/miss At Shift

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Studder/miss At Shift

    Well, it all started in just a couple days ago. The problem if I hold the gas floored while I shift it misses so bad(for 10-15 seconds) you have to let out of it. It does not detonate it just misses. Then it slowly clears up. Its fine if you let off the gas and shift. The plugs, wires, cap, button,fuel pump are new. It also has a msd 6al I was thinking of swapping the tfi module since I have another. Anybody got any ideas?
    THANKS

  • #2
    How do the plugs look immediatly after this happens..?

    In "missing" do you mean slight backfire..? Is it in the intake or exhaust..?

    " Motorsport really has no need for a group like ours, but we will endeavor to serve regardless." - PRDA

    Comment


    • #3
      sorry

      It is missing/not firing but not backfireing. Only misses for a few seconds then clears up till next shift.

      Comment


      • #4
        first place to start if your ignition stuff is good --

        fuel pressure!!

        if your pressure is dropping a high rpm/boost, it will do that.
        Eric C
        SVOCA Webmaster

        Comment


        • #5
          FIXED!!!!!!!!!!

          If anybody wanted to know it was a bad injector on the #1 cylinder.

          Comment

          Working...
          X