Announcement

Collapse
No announcement yet.

getting the tc ic to fit right

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • getting the tc ic to fit right

    how do tou get the tc ic to fit right with the hood scoop? it was off center and about half sealed.
    85.5 svo 1C
    -Straight roads are for fast cars; curvy roads are for fast drivers.
    -cars win races, drivers win championships.
    http://www.cardomain.com/member_page...5&val=1&page=1

  • #2
    It won't .. not unless you start cutting on the hood.

    Got a question .. exactly why are you swapping on the TC IC? Is it to increase performance or so you can add a BPV without having to tap into your stock IC?

    The performance standpoint is pointless. There's only a 30cfm difference in the two - and it doesn't line up correctly. Besides, it's STILL sitting on top on the 700deg Turbo - even if you DO cut on your hood... min performace gains. The only reason I chose to swap mine out was because I wanted to use a BPV - and didn't want to drill/tap a hole in my stock IC.

    Comment


    • #3
      Got a question .. exactly why are you swapping on the TC IC? Is it to increase performance or so you can add a BPV without having to tap into your stock IC?
      yup that was pretty much it. and so i could keep the stock one looking mint so if i decide to put it in shows it doesn't look like a hunk of junk.
      85.5 svo 1C
      -Straight roads are for fast cars; curvy roads are for fast drivers.
      -cars win races, drivers win championships.
      http://www.cardomain.com/member_page...5&val=1&page=1

      Comment


      • #4
        ........junk?

        ......Only if you dont take care of it & I doubt that~car is sweet.....Never Dull maybe on the top of the stock IC.....
        1 Modded, 1 Not

        Comment

        Working...
        X