piston #

[svobrown]

I have a motor from a 88 tc that I was going to rebuild I found out pistons are new in it the # are H559P on the side with 30 over on the top of the piston,
Is this a forged piston or not?
The rings in it were not off set and do not fit that well, large gap in them. This could be why the motor pushed oil out the seals before I took it out.
This is all I could find on the google search.

Ford 140 Federal Mogul Standard Pistons New
... of federal mogul .040 pistons and pins for ford 140 turbo h559p powered by ... FORD 302
STANDARD FEDERAL MOGUL PISTONS NEW ... FORD 2.3L FEDERAL MOGUL .030 PISTONS NEW ...
www.car-parts-place.com/ p47-33623-ford-140-federal-mogul-standard-pistons-new.html - 26k - Cached - Similar pages
Thanks for any info given--------------------------------------------------------------------------------
An H559P is a Hypereutectic version of the stock forged turbo piston L2500F which are both made by Sealed Power/Federal Mogul.

That piston is not recommended for use around here unless you keep the boost at very low levels.

Brent


Found what I was not looking for.

[dvcrogers]

Std-20-30-40; Use w/E441K ring set; 2-2.00mm, 1-4.76mm Ring Grooves; 1.577 CD; .9122 Pin Dia. Recessed head w/offset D shape .095" deep.;
Description: Cast Piston
Application: 1989-1983 FORD - Car (2.3L 140 SOHC Turbo L4) Sealed Power fed H559P Usually ships in 1-3 working days $51.40 $28.27
Std-20-30-40; Use w/E441K ring set; 2-2.00mm, 1-4.76mm Ring Grooves; 1.577 CD; .9122 Pin Dia. Recessed head w/offset D shape .095" deep.;
Description: Cast Piston
Application: Refer to Standard Size Sealed Power fed H559P20 Usually ships in 1-3 working days $51.40 $28.27
Std-20-30-40; Use w/E441K ring set; 2-2.00mm, 1-4.76mm Ring Grooves; 1.577 CD; .9122 Pin Dia. Recessed head w/offset D shape .095" deep.;
Description: Cast Piston
Application: Refer to Standard Size Sealed Power fed H559P30 Usually ships in 1-3 working days $51.40 $28.27
Std-20-30-40; Use w/E441K ring set; 2-2.00mm, 1-4.76mm Ring Grooves; 1.577 CD; .9122 Pin Dia. Recessed head w/offset D shape .095" deep.;
Description: Cast Piston
Application: Refer to Standard Size Sealed Power fed H559P40 Usually ships in 1-3 working days $51.40 $28.27


Oh, I see you found what you were looking for.