Side Spats

[SVO4PWR2]

i wanna hear from some who has DONE the removel. i know theres nuts inside the rear . how many? any tricks?
thanks -RICH-

[Otto Man]

I would like to know as well.
I took mine off way back when (probably the wrong way) to repaint, and jammed em back in. Is it involved?
Chris

[Kendal Coker]

Take the back seat out, lower portion only, remove the small inspection cover. Squeeze your hand in with a 1/4 drive and a 5/16 or 13/32 socket (I forget which) with a short extention. remove the two nuts. Take all of the phillips screws out from the outside. Also you have to remove the moulding under the door. There is another screw behind it. Hope this helps.

[SVO4PWR2]

Thanks!!!
i could only see one but i wanted to be sure before i did any damage.
your talking the lower rocker panel molding...isnt there "specail" clips that hold that sucker in place?
thanks -RICH-

[Kendal Coker]

Yep, I think you can slide it forward without taking it completely off enough to get the screw out.