SN95 Suspension Swap

[BigNBlue]

I have a set of Tubular Control Arms on order through Chris Roth. I am having the SN95 Ball Joints pressed in. I am wanting to do a full front end suspension and rear end swap. Two questions. With the Tubular Control Arms with the SN95 Ball joint pressed in I will still be able to use stock Koni's correct? In lieu of buying all the parts new what newer year mustang should I bee looking for in the junk yards to rape my parts from? I am wanting to go with 13" brakes. What are all the parts I need to pull. As you can tell I am no mechanic but willing to learn.

Please leave your 2.3 cents worth!!!

[svono50]

Mike, Here is a website that can answer most of your questions:

http://svo73mm.cjb.net/

You should be able to source most parts from the JY or new. From what I know you can use your stock Koni's. You may also want to search through the archives of the RRAX-Mustang e-mail list (Road Racing & Auto Cross) on Yahoo Groups for parts donor cars, although most folks on there reference the website above. Good luck with your project and keep us updated to your progress.