Results 1 to 11 of 11

Thread: serial number

  
  1. #1
    OVER-BOOST!! Ford Builder's Avatar
    Join Date
    Jun 2008
    Location
    Chatham Ontario Canada
    Posts
    654
    SVO's: 1985 loaded, 1C

    Question serial number

    Does the serial number on engine block match the vin number in part. what im getting at is im trying to see if engine matches the car.

  2. #2
    OVER-BOOST!! THESVOTRUST's Avatar
    Join Date
    Jun 2002
    Location
    Brighton MI
    Posts
    1,469
    SVO's: 849L85.51C4E869L1C
    Yes-last 8
    Mark

  3. #3
    OVER-BOOST!! Ford Builder's Avatar
    Join Date
    Jun 2008
    Location
    Chatham Ontario Canada
    Posts
    654
    SVO's: 1985 loaded, 1C
    As in the last 8 didgits should match the vin.

  4. #4
    OVER-BOOST!! Ford Builder's Avatar
    Join Date
    Jun 2008
    Location
    Chatham Ontario Canada
    Posts
    654
    SVO's: 1985 loaded, 1C
    THANKS for your imput Ill check it out Later.

  5. #5
    the well known PIA VIN guy Ken Potter's Avatar
    Join Date
    Jul 2002
    Location
    Woodstock, Georgia
    Posts
    7,602
    SVO's: 84,85,85.5,86x2
    And if it doesn't match your SVOs VIN please post up what you find so we can check the registry to see if it came from a previously registered car.

  6. #6
    Banned 8T6 SVO's Avatar
    Join Date
    Apr 2002
    Location
    El Dorado Hills, CA
    Posts
    2,391
    SVO's: 86 1E -340WHP@12psi
    I've got a EF132552 block that I found wasn't a SVO block.

  7. #7
    OVER-BOOST!! Ford Builder's Avatar
    Join Date
    Jun 2008
    Location
    Chatham Ontario Canada
    Posts
    654
    SVO's: 1985 loaded, 1C
    Finely got to the job in hand .The vin is R F 3ZE 6015 DA What does this tell YOU . And me my car vin is 1FABP28T0FF159594 ??

  8. #8
    Banned 8T6 SVO's Avatar
    Join Date
    Apr 2002
    Location
    El Dorado Hills, CA
    Posts
    2,391
    SVO's: 86 1E -340WHP@12psi
    Ford Builder, your block will be stamped farther down on a flat spot just above the starter.

    Here's a picture.
    Attached Thumbnails Attached Thumbnails engine stamp - SVO.jpg  

  9. #9
    OVER-BOOST!! Ford Builder's Avatar
    Join Date
    Jun 2008
    Location
    Chatham Ontario Canada
    Posts
    654
    SVO's: 1985 loaded, 1C
    Looks like E1 2001 3 Its bearly legiable on the boss wear the water supply tube is. Had to use Magnafineglass And used triple 000 steel so,s not to remove to much of the stampings.

  10. #10
    project magnet SVOPaul's Avatar
    Join Date
    Apr 2002
    Location
    Odenville, AL
    Posts
    2,114
    Quote Originally Posted by Ford Builder View Post
    Finely got to the job in hand .The vin is R F 3ZE 6015 DA What does this tell YOU . And me my car vin is 1FABP28T0FF159594 ??

    Your F3ZE portion shows at least a 1993 part number....F3 shows 93 while an E3 would show 83 and a C3 would be 63. Not sure where you got that number from but as stated prior the last 6 of the VIN would be stamped on the side of the block.

  11. #11
    Banned 8T6 SVO's Avatar
    Join Date
    Apr 2002
    Location
    El Dorado Hills, CA
    Posts
    2,391
    SVO's: 86 1E -340WHP@12psi
    I think he has this:

    RF 3ZE 6015 DA

    Which is a standard casting # for our 2.3 turbo engine blocks.

    The stamp is just to the left of the oil return line. On the stamped pad - yours should have this:

    FF159594

    F = 1985
    F = Dearborn assembly plant
    159594 = last six #'s of VIN (59,594st 1985 Mustang assiged a VIN at Dearborn Assembly Plant)

    If you have another # on this pad, let me know and I will try to find out what it is.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •