Results 1 to 6 of 6

Thread: Ragjoint

  
  1. #1
    Just a bit of BOOST
    Join Date
    Aug 2016
    Location
    Columbus,ohio
    Posts
    2

    Post Ragjoint

    Does anyone know where I can get a original replacement ragjoint? I have a 86 SVO. The original joint is a Plastic or urethane material. I can get rubber ones anywhere, but I'd like to replace it with a original or better. Any help would be greatly appreciated

  2. #2
    OVER-BOOST!! GAboySVO's Avatar
    Join Date
    Dec 2002
    Location
    Acworth, GA
    Posts
    3,261
    SVO's: 2 - 9Ls
    Someone said this one can work. You just need to right size the holes.

    http://npdlink.com/store/products/in...-148817-0.html
    Mike S

    '86 SVO 9L Leather
    '86 SVO 9L Road Warrior
    '96 300ZXTT

  3. #3
    14 PSI Boost FinnSVO's Avatar
    Join Date
    Sep 2013
    Location
    Kangasala, Finland, Europe
    Posts
    54
    SVO's: 84 SVO 1C
    I bought urethane joint of early Mustang (same as on Mike's link above). Need to make holes bit bigger and cut little bit from sides. Half an hour job to put back together. And what difference it made. Original came out in three pieces...
    Lauri

    -84 Mustang SVO
    -88 Tbird Turbo Coupe

  4. #4
    Just a bit of BOOST
    Join Date
    Aug 2016
    Location
    Columbus,ohio
    Posts
    2
    Thanks for the info

  5. #5
    16 PSI Boost
    Join Date
    Sep 2014
    Location
    chicago ill
    Posts
    104
    a original ragjoint is hard to find lmr (late model restoration) sales them they will fit like factory i got a lot from them for my 86svo.

  6. #6
    OVER-BOOST!! svono50's Avatar
    Join Date
    Apr 2002
    Location
    Streamwood, IL
    Posts
    3,924
    SVO's: 86 1C
    Sorry guys, had to move this thread into the appropriate sub-forum.
    Ted
    86 SVO Mustang
    17 Cooper S Clubman ALL4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •