Results 1 to 5 of 5

Thread: Quarter Panel Molding?

  
  1. #1
    12 PSI Boost Daily 86 SVO's Avatar
    Join Date
    Feb 2010
    Location
    Effingham, IL
    Posts
    40

    Quarter Panel Molding?

    Anybody know where to get these? I'm starting my big 'paint' project and my originals have the ends peeling up. Would like to just get some new ones if they are available. Thanks.
    86 SVO
    89 LX 5.0
    88 Saleen 351-blown
    99 Saleen

  2. #2
    OVER-BOOST!! GAboySVO's Avatar
    Join Date
    Dec 2002
    Location
    Acworth, GA
    Posts
    3,252
    SVO's: 2 - 9Ls
    All moldings on the SVO are no longer available. Your paint and body shop should be able remove and re-install what you have.
    Mike S

    '86 SVO 9L Leather
    '86 SVO 9L Road Warrior
    '96 300ZXTT

  3. #3
    OVER-BOOST!! 86-TC/SVO's Avatar
    Join Date
    Apr 2002
    Location
    Connellsville,Pa
    Posts
    576
    SVO's: 86 1C X2
    The thin style SVO moldings as Mike said are obsolete and could be reused. The wide moldings are reproduced now. http://www.foxresto.com/category-s/2435.htm

  4. #4
    OVER-BOOST!! gbeaird's Avatar
    Join Date
    Apr 2002
    Location
    Pearland, Texas
    Posts
    2,032
    SVO's: '86 2R
    Search this site. IIRC, there was a discussion about replacements that were close made by some company that makes the things for several cars. Otherwise, peel the metal backing off the original units and reuse them.
    Gene Beaird,
    86 2R SVO, G Stock,
    Pearland, Texas

  5. #5
    OVER-BOOST!! svono50's Avatar
    Join Date
    Apr 2002
    Location
    Streamwood, IL
    Posts
    3,855
    SVO's: 86 1C
    NOS versions may still exist, but will likely be very hard to locate...search, search, search. The Fox Resto parts are a good option IMHO.

    The metal backing on the trim pieces is what causes the most amount of curling of the trim pieces, so once removed they can be held much flatter. My body shop guy removed the metal backing on my trims before reinstalling them after paint. So far, there is only one corner curling up, but that is because the foam tape has started to come apart.
    Ted
    86 SVO Mustang
    17 Cooper S Clubman ALL4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •