Page 3 of 3 FirstFirst 123
Results 31 to 36 of 36

Thread: oil in intake tube

  
  1. #31
    14 PSI Boost
    Join Date
    Sep 2014
    Location
    chicago ill
    Posts
    96
    How did you connect s one inch hose to pvc hose.

  2. #32
    OVER-BOOST!! GAboySVO's Avatar
    Join Date
    Dec 2002
    Location
    Acworth, GA
    Posts
    3,200
    SVO's: 2 - 9Ls
    Quote Originally Posted by svoturbo View Post
    How did you connect one inch hose to pvc hose.

    Drilled and tapped the AN fitting for the 90* elbow.
    Mike S

    '86 SVO 9L Leather
    '86 SVO 9L Road Warrior
    '96 300ZXTT

  3. #33
    14 PSI Boost
    Join Date
    Sep 2014
    Location
    chicago ill
    Posts
    96
    I understand about the valve cover fitting. How did you attach the big hose to the block breather.

  4. #34
    OVER-BOOST!! GAboySVO's Avatar
    Join Date
    Dec 2002
    Location
    Acworth, GA
    Posts
    3,200
    SVO's: 2 - 9Ls
    I used a short piece of 3/4" hose to fit the breather canister, then the silicone hose over that. Secured with a zip tie.
    Mike S

    '86 SVO 9L Leather
    '86 SVO 9L Road Warrior
    '96 300ZXTT

  5. #35
    14 PSI Boost
    Join Date
    Sep 2014
    Location
    chicago ill
    Posts
    96
    hi where did you get the plastic fitting from that you used on the catch can. and wht size 90 did you use to tap for 3/8 hose.

  6. #36
    OVER-BOOST!! GAboySVO's Avatar
    Join Date
    Dec 2002
    Location
    Acworth, GA
    Posts
    3,200
    SVO's: 2 - 9Ls
    I got both fitting from Home Depot or McMaster- Carr. I don't remember exactly. The one in the valve cover is brass, 1/4NPT to 3/8 barbed 90. The plastic one is the same size. Since yours is to be a show car, I would think the AN has fittings that can be substituted.
    Mike S

    '86 SVO 9L Leather
    '86 SVO 9L Road Warrior
    '96 300ZXTT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •