Results 1 to 11 of 11

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Just a bit of BOOST
    Join Date
    Nov 2009
    Location
    Roy, WA
    Posts
    2

    SN95 Swap LCA fitment issue

    Im currently halfway into an SN95 swap with Moog OEM replacement SN95 LCAs, 94-95 Spindles, and Fox struts and springs. My Konis are shot and the balljoints are on the fritz as well so its time to take the plunge and do the Cobra brake swap.

    Anyways upon removal of the old arms and attempted install of the new arms Ive run into a fitment issue into the K member.
    The arms themselves look to be the right size but with the bushings in place, the gap between the front and rear bushing is 6.5 inches where on the stock arm the gap is just shy of 7. With almost half an inch difference in gap along the K member theres no chance of finessing the K member to get them in.

    Am I missing something or do I need to poach the bushings out of the SVO arms??
    Anyone else had an issue with SN95 arms fitting on the K member?

    I attached a couple photos of the arms side by side for comparison
    Attached Thumbnails Attached Thumbnails IMG_1242.jpg   IMG_1241.jpg   IMG_1238.jpg   IMG_1237.jpg  

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •