Results 1 to 4 of 4

Thread: SVO Tie Rod Options

  
  1. #1
    Just a bit of BOOST
    Join Date
    Aug 2020
    Location
    Raleigh NC
    Posts
    1
    SVO's: '86 1C

    SVO Tie Rod Options

    Hi everyone! I just picked up an '86 SVO as a weekend project so I'm brand new around here. Biggest issue I've found so far is a loose inner tie rod. I figured I'd go ahead and replace the inner and outer on both sides just to be safe. I was wondering what kind of options are out there and if anyone has a product recommendation. Thanks!

  2. #2
    OVER-BOOST!! GAboySVO's Avatar
    Join Date
    Dec 2002
    Location
    Acworth, GA
    Posts
    3,330
    SVO's: 2 - 9Ls
    I used the one from Advanced Auto. I don't think there is anything special about the SVO inner tie rod except it is longer than the standard fox body mustangs.
    Mike S

    '86 SVO 9L Leather
    '86 SVO 9L Road Warrior
    '96 300ZXTT

  3. #3
    Max BOOST! High Roller's Avatar
    Join Date
    Apr 2002
    Location
    Tupelo, MS.
    Posts
    475
    SVO's: 84 9W, 85 1B
    What is the correct length of the SVO inner tie rods?
    Perry Mitchell
    SVOCA#187

  4. #4
    OVER-BOOST!! GAboySVO's Avatar
    Join Date
    Dec 2002
    Location
    Acworth, GA
    Posts
    3,330
    SVO's: 2 - 9Ls
    After thinking about it, it was the outer tie rods that were longer on the SVO to accommodate the wider wheel track. The inners are all the same for the fox bodies.
    Mike S

    '86 SVO 9L Leather
    '86 SVO 9L Road Warrior
    '96 300ZXTT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •