I went by a Ford dealer where a friend works and looked at an '05 Bullitt wheel (it is listed as a Mach wheel, even though there is no '05 Mach). I laid it face down and put a straight edge across the wheel, on top of the lip. I measured down to the mounting face and it was 6.5 in. I then measured a SN95 Bullitt wheel, 5.75 in., so the new wheel will sit 3/4 in. more to the inside compared to a 17x8 SN95 wheel. Clearing the front brakes may be another issue along with the use of a center cap.
Bud
Bud
Comment