Announcement

Collapse
No announcement yet.

Everything new but will not allow me to shift into gear HELP PLEASE

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    How well did the stock cable work with the new clutch quadrant and fire wall adjuster? That's what I am getting ready to change on mine.
    Todd
    86 SVO
    2nd owner

    Comment


    • #17
      Eric I cant send it back yet I'm in Canada and border is closed also clutch master in Detroit is closed due to covid.
      Todd i bought the quadrant, firewall adjuster and cable from lmr. I am going to call them Monday the cable was to short my stock cable worked great I put it on the quadrant notch closet to firewall and it allowed me some room for adjustment

      Comment


      • #18
        Great to hear you got the 'right' setup and it works. Interesting the 8.75 vs 9.25" diameter difference on the PP. I think the Merkur's used an 8.5" disc compared to our 9.0" disc, but not 100% certain. The T9's used a 23-spline input shaft, similar to the NA 2.3L's from the early 80's, while our T5's use the 10-spline input shaft. Sounds like Clutch Masters had a couple mis-matched items.
        Ted
        86 SVO Mustang
        17 Cooper S Clubman ALL4

        Comment


        • #19
          Originally posted by TheRetired1 View Post
          Eric I cant send it back yet I'm in Canada and border is closed also clutch master in Detroit is closed due to covid.
          Todd i bought the quadrant, firewall adjuster and cable from lmr. I am going to call them Monday the cable was to short my stock cable worked great I put it on the quadrant notch closet to firewall and it allowed me some room for adjustment
          I bought my quadrant and adjuster from LMR also. Glade to know it will work with the stock cable. Thanks for the heads up on which notch to use. Also glade you found your problem and got it straightened out.
          Todd
          86 SVO
          2nd owner

          Comment

          Working...
          X