LA3 Swap on an early 85

[mikeyb0013]

You are correct. There is a boss on the lower rear of the intake that can be drilled and tapped for the sensor. That is what I did for my Pimp ECM swap

Great thank you very much!!

[GAboySVO]

You are correct. There is a boss on the lower rear of the intake that can be drilled and tapped for the sensor. That is what I did for my Pimp ECM swap

[mikeyb0013]

I just did the swap on my 85. I am missing the ACT sensor. From where the plug is on the Ron Francis harness I used it looks like I need to tap the intake on the bottom near the knock sensor. Is that correct or am I somewhere in the wilderness of Alaska?

Thanks

mike