Converting 84 headlight to 85-86 style

[Wallace18]

What is all needed to convert my1984 SVO to flush style? I see NPD offers some parts. Has anyone done this and have a list? Thanks for any help with this. TW

[gbeaird]

I think this question has been asked before, so do some searching. Not intimately-familiar with the guts of an 84, but I think you'll basically need everything head of the core support to do it right. I'm betting that the header panel and front fascia/bumper cover will need to be changed, and those parts, AFAIK, are NLA available OEM or aftermarket. SVOPaul used to sell the header panel, so he'll know for sure if there's a difference between the 84 and flush headlight models. Then, there's the corner lights and turn signal lights, one of which was never reproduced.

[Wallace18]

I think this question has been asked before, so do some searching. Not intimately-familiar with the guts of an 84, but I think you'll basically need everything head of the core support to do it right. I'm betting that the header panel and front fascia/bumper cover will need to be changed, and those parts, AFAIK, are NLA available OEM or aftermarket. SVOPaul used to sell the header panel, so he'll know for sure if there's a difference between the 84 and flush headlight models. Then, there's the corner lights and turn signal lights, one of which was never reproduced.

Will do. Thanks.

[MIKESVO]

You'll need the aero headlights, the headlight seals, retaining clips and headlight adjuster plates. You also need the 9007 headlight bulb pig tails. One hole will need to be drilled on either side of the headlight panel for the headlight adjuster plates. Wire it up, new bulbs and the other mentioned parts and you'll be good to go. I've done a couple of the conversions over the years.

[Wallace18]

You'll need the aero headlights, the headlight seals, retaining clips and headlight adjuster plates. You also need the 9007 headlight bulb pig tails. One hole will need to be drilled on either side of the headlight panel for the headlight adjuster plates. Wire it up, new bulbs and the other mentioned parts and you'll be good to go. I've done a couple of the conversions over the years.

Thanks, You have confirmed what I thought. NPD is going to get with me next week and let me order the correct conversion parts. Their Fox Body guy is at a car show this week, Once he is back I will be on my way. Thanks again. TW

[GAboySVO]

Thanks, You have confirmed what I thought. NPD is going to get with me next week and let me order the correct conversion parts. Their Fox Body guy is at a car show this week, Once he is back I will be on my way. Thanks again. TW

If NPD has the rubber seals and clips to hold them on to the headlights, that would be good information to know. I looked on the site and it appears they have the adjuster bracket (previously unavailable) the top and bottom retaining clips for the headlight, so hardware wise, they have what you will need.

[MIKESVO]

It looks like Blue Oval Industries has everything in stock, but the headlight adjuster plates.

[Wallace18]

Thanks Guys!

[Wallace18]

From NPD I ordered the following.
SVO headlight seals
SVO spring clip kit (upper)
SVO spring clip set (lower)
2 SVO Adjuster ring assemblies
SVO headlight opening seals retainer set
L&R Headlight housings
2 headlight bulbs 2 headlight bulb retainers

Hopefully this will do the trick.

[svono50]

I think you may need the 9004 bulb connector pigtails too?? I know Mike mentioned 9007's, but our flush headlights take 9004's.

[MIKESVO]

9004 or 9007 samey same. Amazon has a ceramic pair for around $8

[Erics SVO]

NOt sure what your budget is, or goals for the car. Paul at SVPU has adjusters made in aluminum now.

[Wallace18]

NOt sure what your budget is, or goals for the car. Paul at SVPU has adjusters made in aluminum now.

Not sure what you mean by adjusters. Adjusters for what?

[gbeaird]

Actually, headlight adjuster plates that sit behind the headlights. If you're changing to 85-86 headlights, you may need them. Not sure if plastic units are available. He has ones in natural aluminum finish, and black powder-coating. Here is a link to the powder-coated ones:

https://www.svpu.com/product-page/85-5-86-mustang-svo-headlight-adjuster-plates-powder-coated

[Wallace18]

Actually, headlight adjuster plates that sit behind the headlights. If you're changing to 85-86 headlights, you may need them. Not sure if plastic units are available. He has ones in natural aluminum finish, and black powder-coating. Here is a link to the powder-coated ones:

https://www.svpu.com/product-page/85...-powder-coated

Ok, thanks.