TPS Test Harness

[dano67]

Hi guys,
Can anyone post a picture of a TPS Test Harness they made per the Merkur shop manual?
Dan

[dano67]

This is what I landed on. Easy to use. No back probe or wire piercing.

[scenario]

very cool!

Can you post a pic of the Merkur manual diagram for this?

[dano67]

Unfortunately I didn’t save the pdf and it is a real PITA to find on here. The bottom line was it said to use old connectors to assembled a test harness. This is how I did mine:
1- Used old TPS sensor (cut off sensor)
2- Bought a wire harness pigtail from Stinger performance
2- Connected the above and used a multimeter set on continuity to check what wires were connected. (Wire colors are not similar.)
3- Used WAGO connectors to attach wires. Two connectors are 3 port and One is 2 port.
The open port on the two 3 port connectors is for the test leads needed to do the test.

Let me know if you have any questions.

Dan