Announcement

Collapse
No announcement yet.

Opinions wanted

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Opinions wanted

    I am taking my 84 to a local exhaust shop. Right now the 3in exhaust hangs to low and they are going to raise it. While it is there I was going to change the muffler, currently it has a Bassani, that sound like the coffee can mufflers on the honda's. I had read that someone was going to get a muffler like in the pic with 3in inlet and (2) 2.25 outlets, ran side by side to look like the original 84 exhaust tip.
    My question, Would this flow equal to a 3in in/out? I am going with a Magnaflow muffler, and I know in the end its my preference, but any suggestions?
    Attached Files
    If Barbie is so popular, why do you have to buy her friends?

  • #2
    [QUOTE=skippydh] to look like the original 84 exhaust tip.QUOTE]


    Yeah, I meant to just give it the appearance from the back to look like the orginal tips.
    With my 3in exhaust, A guy I work with asked me what semi I stole my exhaust from.
    If Barbie is so popular, why do you have to buy her friends?

    Comment


    • #3
      It will be hard (if not impossible) to get two over the axle pipes on one side.
      86 2A Bi-wing delete
      90 LX
      95 Lightning

      Comment


      • #4
        I don't think it matters which muffler you use, it will probably still sound like a John Deere. Why not just go 3" all the way?
        Rick

        84 1C
        80 AMC Eagle
        01 Jincheng 50( with 70 big bore)

        Comment


        • #5
          I agree it would be VERY difficult to get the two pipes to pass up and over the rear axle, and around everything else, and still get them to meet up and look good / even at the rear bumper. Maybe if you could bend the 2 pipes exactly the same, then weld them together every foot or so, then cut off the excess together at the rear bumper at the same time after it is all hung and installed. Maybe it would work out.

          Comment


          • #6
            I just got my car back, and all I can say is wow. What a difference it made. I went with a 3in in and out with a Magnaflow muffler. It is a tiny bit louder at Idle(before it was hard to tell the car was running) but in the higher RPM and on the highway is alot more quiet. I can hear my turbo spool now. Plus I dont have to worry about speedbumps.
            If Barbie is so popular, why do you have to buy her friends?

            Comment


            • #7
              Got any pic's of it.. I like the idea, gust wondering that the finished product looks like..

              Thanks Dave
              84 SVO 9W #3537 6th fastest @ '09 autocross

              Comment


              • #8
                I had some from under the car also, but they were to dark. I will have to take more. Here is a before and after
                Attached Files
                If Barbie is so popular, why do you have to buy her friends?

                Comment

                Working...
                X