Tweet
I did a search and nothing really came up that answered my questions. I was wondering what is needed to put the cobra brakes on the svo? i know it will need bigger front wheels, but do the calipers and discs go right on or do i need new lines, master cylinder, anything like that?
-
'71 Pinto
'86 Cougar XR7
'96 Cobra #2593 Black/Black -
You have two choices...
1. Switch the SN95 spindles and hubs, which also means that you'll need different front struts at the minimum (V8 Fox type), SN95 front control arm (I think some people have enlarged the ball joint hole on the SN95 spindle to the SVO size to keep the SVO front control arm), perhaps a smaller bore on the master cylinder (15/16 or 1 inch).
2. Send your spindles to Baer Inc. (www.baer.com) and they will modify the SVO spindle for the 13 inch rotor, an aluminum hub and PBR caliper. They'll also supply all of the necessary master cylinders, lines, bolts, etc. with the kit.
HTH WS
Comment