Announcement

Collapse
No announcement yet.

Emmision Decal Placement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Emmision Decal Placement

    Well I finally got a new coil cover and emmisions decal. Would someone take a pic of the decal on the cover, so I can get it close to its proper location. Too bad the decal will cover the "slot" for the coil wire.
    Also, would someone take a pic of the Seat Belt decal in the window behind driver? I just got a new one of them too. Maybe just X inches towards the rear, gray window frame, X inches above lower gray window frame? (I don't recal that decal being on the other window.)
    Thanks in Advance
    Last edited by Otto Man; 10-13-2009, 12:02 AM.
    Chris Weber
    1985-1/2 9L, #6209, original owner

  • #2
    Chris,

    Where did you get a cover? Are those still available? Where'd you get the new decal? The one for our 86 has the top tab broken, and I'd like to replace it, if possible. Thanks.

    As for placement of the decal; it appears to have just been kind of slapped on the cover without a lot of care. The one on our cover is not quite centered on the top part of the cover, and is about 3/4" from the top edge of the cover (by the top attaching tab). The vacuum hose map is on the top surface, and the emissions information is laid down the vertical surface. I'll try to get photos, but suffice to say you'll probably attach it with much more care than was originally used when the car was built. One needs to be able to read it while standing there at the front of the car looking into the engine compartment.

    Our 86 had no seat belt decal on the windows. I am guessing a tinting installer removed it while tinting the windows.

    Gene Beaird,
    86 2R SVO, G Stock (Finally home),
    Pearland, Texas
    Gene Beaird,
    86 2R SVO, G Stock,
    Pearland, Texas

    Comment


    • #3
      Originally posted by gbeaird View Post
      Chris,

      Where did you get a cover? Are those still available? Where'd you get the new decal?
      The covers are available - check with PPI or SVPU. The decals are available from Osborn Reproductions (a Reunion sponsor).

      Comment


      • #4
        Just an emmissions sticker from what I have stored on the computer...
        I couldn't find one of the window sticker.
        Attached Files

        Comment


        • #5
          Originally posted by svobud View Post
          The covers are available - check with PPI or SVPU. The decals are available from Osborn Reproductions (a Reunion sponsor).
          Thanks Bud!!! In addition to the cover, we may even have the emissions decal in NOS depending on the calibration code...
          Performance Parts, Inc.
          13120 Lazy Glen Court
          Oak Hill, VA 20171-2326

          703 742-6207

          http://www.performancepartsinc.com

          Comment

          Working...
          X