wire qustion Easy

[NY eric]

Ok I have 2 sensors and 2 wires cant remember which went were. A beer for the correct answer. On the injector loom for an 86 there is a red and white wire. is this for the sender in the block or the sender on the turbo line.

[Pat_in_L.A.]

You gonna make me go out in the cold with a flashlight for a beer? I'll be back in the morning.

[kiwi]

From memory......

.....I think there is a connector with a red & white wires running/plugged into my stock BCS// EDIT: Brown & red here........
Edit......that is not on the injector harness....I'm looking in my manuals/ Car is covered up.....

[Pat_in_L.A.]

Re: From memory......

Originally posted by kiwi
.....I think there is a connector with a red & white wires running/plugged into my stock BCS........
Edit......that is not on the injector harness....I'm looking in my manuals/ Car is covered up.....

Kiwi will say anything you want to hear for a beer...

I admire that!

[NY eric]

cold??

Originally posted by Pat_in_L.A.
You gonna make me go out in the cold with a flashlight for a beer? I'll be back in the morning.

Dude you have no Idea what cold is. LA is what 70 right now. Come on. No realy I think it is to the sensor for the block but i am shot. I am done for the night so if anyone can help tomorrow that is cool.


Know I know why most people ditch the EGR. God what a chineese torture puzzle to get in there.

[kiwi]

....just checked.....

I don't haVe a separate red & separate white coming off the injector harness as a pair......might have been 'rerouted" in the past.....

[NY eric]

wire color

Red wire white stripe (single connector). The other wire is a single yellowish brown (cant see the actual color due to the crud on it) coming from the same loom as the water temp sensor.

[kiwi]

Stumped.....

.....uncovered the car again & don't see it.....

[NY eric]

I will have to check the color again

I thought it is red and white. It is the only wire that is not connected to an injector on the injector loom.

[Otto Man]

I believe its the coolant temp "guage" sensor just below the oil pressure sender can
See attached
Sam Adams is fine
Chris

[NY eric]

sam adams it is

Thanks. What book was that in?

[Pat_in_L.A.]

Re: wire qustion Easy

Originally posted by NY eric
Ok I have 2 sensors and 2 wires cant remember which went were. A beer for the correct answer. On the injector loom for an 86 there is a red and white wire. is this for the sender in the block or the sender on the turbo line.

The tan wire with the red stripe goes to the oil pressure sender at the back of the head on the driver side.

Now fax me a guinness.

[Gator]

If i remember correctly, the rubber end ( or boot ) to the wires wont fit on eachother....so if you go to put it on the oil sending unit and it wont go on or falls off easily....it doesnt go there.

[NY eric]

hu

OK I will have to take your word for it. I will try again in a few hrs. thanks for allyour help

[Pat_in_L.A.]

Don't listen to them. They're just after your beer.

BTW, where's my beer?