Valve cover oil separator!

[SVOJEFF]

How would you fix this item if it has losened in the hole where it once was tight? Not anything nasty if that is what you are thinking! I am think of a plan before, I could get a piece of copper 3/8 tubeing and tap in and just use a gas line to afix it back to the separator? Or could tap and put steel line and afix gas line to separator? you all's help would be usefull before the long trip to Nashville and smelling the oil every now and then like when you have dog poop on the bottom of your shoes!

[Pat_in_L.A.]

If you just need it a smidgen tighter try this:

Get the nearest size of heat shrink tubing to fit over the nipple and shrink it on with a heat gun. It can easily trimmed with a knife or a razor blade.

[lonchair]

Get a turbo coupe valve cover with a readily available rubber gasket and push in breather.

[Gator]

Originally posted by Pat_in_L.A.
Get the nearest size of heat shrink tubing to fit over the nipple and shrink it on with a heat gun. It can easily trimmed with a knife or a razor blade.

On the money ! Ran mine that way for years.