Oil pan gaskets.

[Henson]

Is it possible to use the single rubber oil pan gasket rather than the four piece set? The pan is leaking, as every pan I’ve ever installed, though this pan is now pouring out the front. Before you say it, yes I put plenty of sealant in the corner of the arches. I have the after market pan with the traps. It would seam to me that the single rubber gasket would create a better seal. Have you done this?

Here is a pic of oil splatter on the "outside" of the exhaust/ down pipe. What do you think?

[Otto Man]

You have posted a picture of an SVO at speed. Perhaps there is another picture? All the same its a fine shot!

[Henson]

Though the Z03 was driving like a pansy. It's still fun flying right past him.
What about the pan.

[8T6 SVO]

Single Piece Oil pan gasket

Make sure that if you buy the single piece rubber gasket, that it has provisions for the larger 2 bolts in the front & back (four total) Fel Pro sells a pan gasket that has all bolt holes the same size. You won't get the the larger bolts to fit this gasket.