Tweet
Is there a way to deactivate the rev limiter in our cars? I was running at about 6500 rpms today and i have a stock computer. Thanks.
-
-
The only way to do it is with an after-market computer ( sdtand-alone ) or have a chip-burnt to eliminate it.
The only issue is that unless you have mods done to the car...2.3T's normally dont make any poswer after 6 grand.
" Motorsport really has no need for a group like ours, but we will endeavor to serve regardless." - PRDA -
yes i do have mods done like a cam and such, i was just very curious why is was revving this high with the stock computer.Comment
-
The stock rev limit is 6250 rpm, or so says the .bin file I pulled out of my computer and loaded into PCMX.
Don't rely on the stock tachometer, they tend to be inaccurate, especially at higher rpms. I checked mine against my Snap On tach and it was off about 50 rpm at idle.1986 1D - An oil return and rear end away from FINALLY being fully streetable again!
2007 Mazda3 2.3L 5 Speed hatchComment
Comment