Siemens DEKA ID injectors

[Guyver]

I need alittle help, I got my hands on a set of Siemens Deka ID "895" injectors that came out of a great running 86 . Anyone know (Mike Help) the flow rate of these injectors or if they are even worth re-using. I have a new set of RC eng. injectors ready to go just in case. The "895"s are gray top and only say Siemens Deka and the number 895 on the side.

[Guyver]

Hey I did a bunch of digging and these "895"s are from the old dodge 2.5L turbo days. They are a 34.8 pound replacement injector. No wonder they worked in the 86 SVO. thanks for looking anyway.

[jamman]

Hey these look to be the same ones that are in my 86 SVO that I just bought ..

Gray top's and have 895 on the side ...

Seem to run ok except the idle is rough and that may be an issue with base idle then ..

Previous owner swears these are 42#'s but now I'm not so sure ...

Can anyone else confirm the flow rate of these ?

[jamman]

I found one webpage that said this:

33 lb/hr at 55psi

Suposed low impedance, I will measure one with a meter this weekend ...