Tweet
Needing to replace all of the original hoses on an '86 9L (I think) recently acquired. Went to Autozone and asked for all the hoses to do the job. Well they list about 15 different hoses for this car. Anyone have any info on where these all go? Is there a good shop maunual you can suggest as I am somewhat new to these cars. Any info would be greatly apreciated. Cheers!
-
-
Do you have the Ford numbers?
If so, Here goes. The 18B402 Tube is the metal tube set o nthe left side of the cam cover.
E5ZZ-18472-C Lower Water Pump outlet from 18B402 Tube
E6ZZ-18472-E From 18B402 Tube to Oil Cooler
E5SZ-8A506-A Small green lined splice hose from T on 18B402 Tube to turbo center section
E5ZZ-18472-B "Weird Shaped Heater Core Hose" Unavailable- Make up from bulk
E4ZZ-18472-AA Lower Radiator Hose
E4ZZ-8A506-A Upper Radiator Hose
E5ZZ--18472-A Engine Oil Cooler Inlet & Outlet
E5ZZ-18472-D From Heater Core Inlet to Engine
E5ZZ-18472-F From Heater Core Outlet to 18B402 Tube
Maybe VatoZone can cross the OE numbers. These are from the Ford master parts book.86' 2R Original Owner "Project Originale"; 86' 2R "Project Bolo" 84' 9W "Project Bondo"; 86 2R "Project Evil" (GONE!); 90' 5.0 LX Vert; 98 Dodge Neon ACR Track Car; 05 SRT-4 ACR! ---"Real tomato ketchup Eddie?" -
If you do a search -- you will probably find the diagram of where they all go, and routing...Eric C
SVOCA WebmasterComment
-
Thanks, I'll see if they can cross reference them. That should help.Comment
-
Motion Dynamics sells complete heater hose replacement kits. http://www.motion-dynamics.net/
As you'll find out, several of those hoses from Ford are very expensive compared to the aftermarket alternatives.Comment
Comment