EGR Adapter Fitting

[fast-kat]

Anyone have an extra small port EGR adapter fitting that screws into the end of the exhaust manifold? The previous owner took off the EGR system and welded a plug onto the end of the adapter fitting . I need the EGR system in order to pass smog here in Las Vegas

[SVOBart]

Have a drill press handy? Get a tungsten bit and some lubricating oil and drill a new hole in the old fitting.

[fast-kat]

Have a drill press handy? Get a tungsten bit and some lubricating oil and drill a new hole in the old fitting.

No can do. They screwed an end cap into the fitting and welded around the threads. I am going to take the fitting into work Friday but it doesn't look promising.

[Eyelawdoc]

Send an email to Scott at: Princesscharlie1 at_ netzero _dot net He may have one that he will sell you.

[SVOBart]

No can do. They screwed an end cap into the fitting and welded around the threads. I am going to take the fitting into work Friday but it doesn't look promising.

Wow...that's a bit extreme. Mine was just welded up with a MIG welder. Few minutes worth of work in the press and I was back in business.

[SVOeric]

Send an email to Scott at: Princesscharlie1 at_ netzero _dot net He may have one that he will sell you.

Princesscharlie won't like you much when he starts getting spammed...

http://www.svoca.com/forum/showthread.php?t=11123

I edited the email to make it less likely to get spammed..

[Eyelawdoc]

Thanks, Eric!