Turbo Oil Lines

[UncLarryWasRight]

I got a complete set of oil lines from stinger and was wondering if there is any sage knowledge that i should be aware of before installing them. This will be my first time doing this so it would be helpful.
Thanks,
Nick

[grey88smokin]

Take your time and follow the directions. They should be the same as the maxpsi lines? Use some felon tape and don't over tighten the fittings and your golden. Oh and make sure you use a good gasket for the return flange, the thin one maxpsi supplies is thin and leaked on me.

[NavySVO]

put the bottom portion of the return line on FIRST