Pics of NOS flocking

[NavySVO]

CC, check your PMs mate!

[Ken Potter]

While these pics aren't the greatest I'll throw them out there for comparison. These panels were re-done by Stackz and were some of, if not the first, ones he did. The color is a little light but I'm satisfied.

These were done a few years ago. It apparently has become a more accessible process.

[chalkys_explorer]

Andy,
on that NOS piece, does the flocking extend into the hater vent recess or does it end and the angled bevel???

[MacToolsSVO]

Chris....the flocking DOES go beyond the bevels in the vent area but kind of fades after about halfway back.

I also have a set of panels Al (STACKZ) did for my driver svo and I am also very satisfied...not an EXACT match, but very acceptable for a driver.

[MeZapU]

What method was used to reattach the half round rubber seal at the bottom and the idiot lights? Epoxy?

I used a soldering iron(set to a low temp) to flare(melt) what was left of the plastic studs to retain the rubber strip.

I also used the soldering iron to reattach the turn signal and light lenses. Melting the plastic together. Just as the factory did it.

[Donlin]

For those that have used the DonJer kit. Did you get the mini kit or the enhanced kit. Does the mini kit have enough to do both panels? Im looking at adding auto meter gauges and have bought GT panels that I would like to modify to use and flock so they are close to stock looking.

Thanks,

Jay

[MeZapU]

I used the Donjer charcoal gray nylon mini flocker kit.

I can probably do 3-4 more PAIRS of bexels with how much material is in the mini kit.

[Ken Potter]

I'm looking at adding auto meter gauges and have bought GT panels that I would like to modify to use and flock so they are close to stock looking.

Thanks,

Jay

Great idea

[84JOETURBO]

I think I had chalky do mine a few years ago when i got my 84 and they turned out great(I think lol). like said they are not NOs but definetly look better than the older dash panels. Swapped thos into the 2R this weekend and really made a difference.