Announcement

Collapse
No announcement yet.

spoiler removal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • spoiler removal

    Hey guys - just wanted to check up before I pulled the rear spoiler/s. Is it just the 4 exterior screws and 3 or 4 nuts inside the hatch? Are there any clips or tabs that easily break?

    Thanks

  • #2
    Studs...

    ....the studs protruding from the lower spoiler towards the front of the car thru the hatch DO NOT like to get bent...the upper wing has 'tabs' in the rear....
    1 Modded, 1 Not

    Comment


    • #3
      The lower spoiler has 10 hidden nuts holding it from inside the hatch cover. It has 2 common screws to the upper bi-wing at the forward most location. The Bi-wing has two more external screws at it's farthest forward mounting point, as well as two studs with nuts towards the center, that are accesssable from underneath once the hatch is opened.

      Comment


      • #4
        Thanks guys - I appreciate the help.

        Comment


        • #5
          Don't try to pry up the lower spoiler. The studs on the 10 hidden nuts are not overly strong. Try pushing up on the studs to break it loose. A warm day cannot hurt either.
          84 SVO 1 owner, 02 S.Crew, 69 Mustang, 85 McLaren

          Comment

          Working...
          X