Any Experience with the Eibach Pro-Kit 3518.140???

[n20capri]

These are specific to 6cly and 4cly Fox Chassis cars and was wondering if anyone had any experience with them on their SVO...

My pop got these for me not knowing the "B" springs for V8 cars work just fine on the SVO...honest mistake...

Wondering if I should exchange them...

Any insight?
Thanks

[Raven855]

They are the exact spring rates as the Motorsports b kit front and rear. The only difference is on the rear the b kit lowers .75 inch and the Eibach lowers 1.5 inch.

[n20capri]

They are the exact spring rates as the Motorsports b kit front and rear. The only difference is on the rear the b kit lowers .75 inch and the Eibach lowers 1.5 inch.

Awesome thanks! That's actually perfect as I was a bit worried about how low the B's would lower the car...didn't want to get too nutty!

Thanks again

Edit - read that wrong...shoot these lower the rear MORE! Hmmmm...I like that raked look!

[kiwi]

If you don't have to deal with too many speed bumps, then go for it....pulled mine out.

[n20capri]

If you don't have to deal with too many speed bumps, then go for it....pulled mine out.

So it sat super low? Any pics?

[n20capri]

Also, you guys put caster camber plates on when you did springs?

[Raven855]

I used the H&R sport springs. The drop is 1.6 front and 1.5 rear. I did install them with new spring isolators and maybe that is why I do not seem to have any issues with the pot holes or speed bumps. I used the Mac cc plates for awhile but they were replaced with the MM cc plates. They were a great improvement over the Macs unit. Highly recommend them

[n20capri]

I used the H&R sport springs. The drop is 1.6 front and 1.5 rear. I did install them with new spring isolators and maybe that is why I do not seem to have any issues with the pot holes or speed bumps. I used the Mac cc plates for awhile but they were replaced with the MM cc plates. They were a great improvement over the Macs unit. Highly recommend them

Yeah I have new isolators and stuff on the way...looking at CC plates now. I have the MAC's on my Capri with no issues. My Baer Brake upgrade used different spindles which threw the front end out out of sorts so I needed the CC plates to straighten things back out...