why? i have a stock block with a big valve ported head,lunati cam with about .500 lift,T3/T4@20psi, stock intercooler, ported/gutted intake,stock TB,3" downpipe(let me know if you need anymore info.) It dos'nt hit full boost until about 5000,then i need to shift at 6000(7000 when i put the chip in, a little bit better)
Announcement
Collapse
No announcement yet.
Full boost at 5000rpm
Collapse
X
-
-
I mean whats "inside" the turbo ?Originally posted by joshs84SVO View Postthe turbo says A/R.50 , before the head swap,boost was at 4000. With T3 it was at 3000
and again, where is the timing ?
" Motorsport really has no need for a group like ours, but we will endeavor to serve regardless." - PRDA
Comment
-
OK, so here are my guesses seeing as thats about how much info we have to go on here.Originally posted by joshs84SVO View Posti only know that it is a T3/T4 off of Ebay. stock waste gate
1) Your T3/T4 is a PPOS. ( Especially if its an SSAutochrome Turbo and/or you bought it used. )
2) Seeing as how you havent answered the Q about timing, your timing is screwed up.
" Motorsport really has no need for a group like ours, but we will endeavor to serve regardless." - PRDA
Comment
Comment